BFKMQ - FM-47 LIQUID ADHESIVE
- MSDS: BFKMQ
- Manufacturer: AMERICAN CYANAMID COMPANY
- Product Name: FM-47 LIQUID ADHESIVE
- National Stock Number: 8040-00-664-2912
Product Identification
Product ID:FM-47 LIQUID ADHESIVE
MSDS Date:01/01/1985
FSC:8040
NIIN:00-664-2912
MSDS Number: BFKMQ
Responsible Party
HAVRE DE GRACE, MD 21078
US
Emergency Phone: 201-835-3100
Cage: 07542
Contractor
Telephone: 201-835-3100
Cage: 07542
Ingredients
ETHYL ALCOHOL (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: <20%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
ETHYLENE DICHLORIDE (SARA III)
CAS: 107-06-2
RTECS: KI0525000
Fraction By Weight: <40%
OSHA PEL 50 PPM/C,100PPM
ACGIH TLV: 10 PPM; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: <20%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:INHAL:DIZZINESS OR DROWSINESS. SKIN:DRYNESS &
IRRITATION. EYE:MAY CAUSE BURNS.
First Aid
First Aid:SKIN & EYE:FLUSH WITH PLENTY OF WATER FOR15 MINUTES, CALL MD.
INHAL: REMOVE TO FRESH AIR.
Fire Fighting
Flash Point:43F;6C, TCC
Extinguishing Media:DRY CHEMICAL, CO*2, FOAM; WATER SPRAY MAY BE
INEFFECTIVE.
Fire Fighting Procedures:SELF-CONT BREATH APP, WATER SPRAY TO COOL
EXPOSED CONTAINERS
Unusual Fire/Explosion Hazard:BURNING PRODUCES HYDROCHLORIC ACID GAS.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF IGNITION, WEAR SPLASHPROOF
GOGGLES & RESPIRATORY PROTECTION. COVER WITH INERT ABSORBENT
MATERIAL. SWEEP UP AND PLACE IN WASTE DISPOSAL CONTAINER. FLUSH
AREA WITH WATER.
Handling
Handling and Storage Precautions:PRECAUTIONS FOR CLASS IB FLAMMABLE
LIQUID.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST:PREFERABLE. MECHANICAL:ACCEPTABLE.
Protective Gloves:RUBBER/PLASTIC
Eye Protection:SPLASHPROOF GOGGLES
Other Protective Equipment:EYEWASH FOUNTAN & SAFETY SHOWER.
Supplemental Safety and Health
SPECIFICATION:TYPE I, CLASS 3. CONTAINER: 1 PINT CAN
Chemical Properties
HCC:F2
Vapor Pres:83
Spec Gravity:0.98
Solubility in Water:APPRECIABLE
Appearance and Odor:VISCOUS AMBER COLORED LIQUID, SWEET ODOR.
Percent Volatiles by Volume:80
Stability
Stability Indicator/Materials to Avoid:YES
NO SPECIFIC INCOMPATIBILITY.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON MONOXIDE AND/OR CO*2 IN THERMAL
DECOMPOSITION.
Disposal
Waste Disposal Methods:MFR RECOMMENDS TO INCINERATE OR BURY IN A
LANDFILL. DISPOSAL METHOD MUST BE IAW FEDERAL, STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.